Universal milling machine

UFM 210 Vision

UFM 210 Vision

The revolution of the table milling machine – the unthinkable becomes possible!
Thanks to the swivel range of the spindle from – 45.5° to + 95.5°, completely new application areas are made possible – there are no limits to your imagination. Another highlight is that the depth is also adjusted via the spindle, so the stop remains fixed. The linear height adjustment rounds off the uniqueness of this machine. Our extremely user-friendly touch control also makes this milling machine unbeatable in terms of efficiency and speed!

Learn more about the UFM 210 Vision universal milling machine. Swivel left and right in the 360° view to get more information via the + symbols.

Details

UFM 210 with Function Stand V20

Sliding table with automatic depth compensation

Milling Fence V17

CNC control with 12.1” touchscreen – 4 axes controlled (height, tilt, depth and stand)

Milling depth adjustment is performed via the spindle (the fence does not move)

Integrated tool compartment

Infinitely variable speed control via direct drive

In the “Toolfix” version with automatic tool clamping system and HSK-F 63 interface

Special table insert for safe machining and underside-guided workpiece handling (optional)

Height adjustment is carried out vertically within the machine column, eliminating any need to correct the cutting depth when the spindle is tilted.

Swivel range from –45.5° to +95.5°

Equipment

Standard Equipment

Table size 1,625 x 820 mm, heavily ribbed cast table, finely planed, with extendable support, machine height 900 mm
Table slide with automatic depth adjustment
Table slide adjustment to any tool possible
Two replaceable table inserts, made of aluminum with hard-coat coating, for tools
up to Ø 250 mm for cutting depth up to 55 mm and for 55 to 110 mm
Taper of the milling spindle MK 5, milling arbor Duo Ø 30 x 140 mm
Electrical height adjustment, vertical in the stand, [therefore no correction of the depth adjustment when the spindle is swiveled] approx. 190 mm in rapid and creep speed, display accurate to 0.1 mm
Electrical swivel adjustment from -45.5° to + 95.5° in rapid and creep speed, display to 0.1°
Electrical milling depth adjustment (stop remains fixed on the machine table, the adjustment is made via the milling spindle) in rapid and creep speed, display accurate to 0.1 mm, virtually no correction of the feed rate required
Infinitely variable speed control from 1,500 to 12,000 rpm via direct drive
Speed preselection by tapping the stored 10 speeds or variable input via keyboard – without changing belts
Pushbutton switch for automatic start and stop of the spindle
Double-sided swivel unit bearing in strong journal bearing, with automatic clamping of the swivel angle
Double-sided linear bearing for milling depth and milling height adjustment
Milling fence V 17 fixed on the machine table, infeed jaw adjustment according to digital counter to 0.1 mm accuracy, adjustable from the operating side; cast fence jaws each 500/500 mm
Operating hours counter with job hours counter. Machine socket for feed unit, operating button in the console
Electrical spindle interlock, low-maintenance machine, HOFMANN milling protection “Centrex”
Integrated tool compartment, on the side of the base
3 extraction ports 120 mm Ø on the fence and below the table
Clockwise rotation via two-hand operation with warning indicator
Programming protection via key switch, serial interface for reading out the data
Accessories: operating tool, operating instructions
CNC Control
12.1” touchscreen interface, CNC tool management, logical, clear interface with text-supported icons, uniform screen layout and continuous menu bar, fast navigation between screens without intermediate steps.

Optional

UFM 210 VISION
With function stand “Komfort” ** 7.5 kW (10 HP) – 400 V, 50 Hz (direct drive)

Four-axis control via touchscreen user interface for spindle height, spindle swivel, spindle depth and feed stand height
Feed stand with pneumatic clamping
(feed unit not included)

UFM 210 VISION
With function stand “Komfort”** “Toolfix”
7.5 kW (10 HP) – 400 V, 50 Hz (direct drive) with automatic tool clamping system

High-frequency electric spindle – water-cooled
With interface HSK-F 63, incl. 1 milling arbor HSK-F 63 Ø 30 x 140 mm
Pneumatic milling arbor change at the push of a button, with automatic blow-out device during arbor change
Tool pre-assembly station

Options

Table size 2,000 x 820 mm including extendable support by 480 mm
Table extension on both sides, to 2,700 mm including extendable support by 480 mm
Special table insert for holding coving boards or coving rods, for safe machining and guiding of the workpieces from below
Safety rulers anodized (5 pieces) and coving board to the cast jaws and special table insert
Splinter tongue aluminum anodized, 2 pieces required
AIR-LOCK for milling fence UFM 210 – V 17
Both fence jaws are pneumatically released and clamped.
The clamping of the jaws is monitored – if they are not clamped, the machine cannot be started.
Integral fence jaws 500/650 mm or 650/650 mm, instead of cast jaws
Filling rod and waste holder, to the integral fence jaws
Milling arbor Duo Ø 30 mm MK 5, clamping length 140 mm
Milling arbor Duo Ø 40 mm MK 5, clamping length 160 mm
Milling arbor Duo Ø 50 mm MK 5, clamping length 160 mm
Quick-action clamping nut “fix” Ø 30 mm
Quick-action clamping nut “fix” Ø 40 mm
Quick-action clamping nut “fix” Ø 50 mm
Collet chuck MK 5 with collet nut, without collet
Collet chuck for MK 5 from diameter 3-25 mm, increasing by 1 mm
HSK-F63 is only available for UFM 210 “Toolfix”!
Milling arbor Duo Ø 30 mm HSK-F63, clamping length 140 mm
Milling arbor Duo Ø 40 mm HSK-F63, clamping length 160 mm
Collet chuck for HSK-F63 – without collet
Collet for HSK-F63, available from Ø 6 – 25 mm in 1 mm increments

Feed unit type 2048 for UFM 210 stand

Motor 0.75 kW, 4 rollers, 8 speeds, comfort adjustment lever
Infinitely variable speed control for feed unit (400 Volt / 50 Hz / 3 phases)
Operating elements in the control panel
Feed unit equipped with air nozzles
For blowing off/cleaning the milling table.
Air blast is activated by pressing a button. Air volume is adjustable by regulator.

Sliding carriage incl. eccentric clamp

For mounting on the machine table
Height above table 58 mm
Usable table size 410 x 225 mm, total length 1,050 mm
Max. Workpiece clamping length 1.20 – 1.50 m
Travel distance approx. 710 mm
With hardened guide shafts and adjustable, high-precision rollers
Kickback protection for insert milling with 2 infinitely adjustable fastening shafts
Counter fence with dial gauges, for exact milling to format, adjustment range 90 mm, standard passage 165 mm
Template holder, attached to the control panel

HOFMANN Guardian (Patent)

Clamping of the milling stop jaws is monitored (if they are not clamped, the machine cannot be started)
This prevents unintentional retraction of the stop jaws by the feed
2 LED signal lights (for right or left jaw) in the control panel
Safety light bar on the milling fence, warning lights on the fence light up when the spindle is running